For this pattern please go to
Sunday, April 4, 2010
Wednesday, March 31, 2010
Knit Cable - Trace Cable Stitch Pattern
This is an easy diamond pattern. It can be time consuming because the cable needle is used in almost every row. I include the pattern I used and I also included the cable pattern and the chart for it. It measured 6 in x 9 in. I used a US 11 needle and only casted on 24 stitches. The cable is done on 16 sts.
PDF link updated to Mediafire. No wait download
Wednesday, December 16, 2009
The Waves Arm Warmer
To purchase this Arm Warmer Pattern:
http://www.ravelry.com/patterns/library/waves-arm-warmer-2
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the "Buy Now" link below. Please do not distribute this pattern to the public.
This is a knitted arm warmer that used increases and decreases to shape the design. It's okay if you're a beginner because I was. I had never done increases and decreases before.
I used a slip stitch type pattern for the
underside for several reasons. It will be nice and snug but very comfortable. You can also take it on and off without stretching it out. It's nice and durable.
Below are some of the information you will find in the instructions.
Below are some of the information you will find in the instructions.
Made Flat, not in the round. You will sew the sides together. The instructions will show and easy way to do so.
Skill Level: Experienced Beginner
CO: 25Finished Size: 6 in wide x 8.5 in high
Yarn: I used Bernat Worsted in Blue
Yard of yarn needed: 60 for the pair of them
Needle Size: I used 10.5
Stitches Used
Increases
Inc 1 = Increase 1 stitch by picking up and knitting connecting strand
between last stitch worked and the next one.
Decreases:
S1 K1 PSSO =Slip 1 , Knit 1 then pass the slip stitch over the knitted 1.
K2tog = Knit 2 stitches together
Other Abbreviations (underside, see picture below:
(WYIF, S1, P1)= Stands for “With Yarn In Front” Slip 1 stitch then Purl 1
stitch
S1 = Slip 1 stitch as if to purl
Heather
Thursday, October 8, 2009
2nd "Warm Me Up" Arm Warmer
$3.00
Purchase here
I wanted to give you some tips along with some information that you will see if you purchase the pattern. I don't want you to go in blind sort of speak. At least this way you have an idea of what the pattern may be.
TIPS
This pattern is made flat, not in the round. Sewing instructions included.
Purchase here
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the buy now link below.
Cost: $3.00
This is a braid styled Knit Arm warmer that I call the "Warm me Up" arm warmer. This is a cabled design. I
do consider this a beginner pattern because I just learned how to
knit and the cable designs were the first thing I wanted to try.
I wanted to give you some tips along with some information that you will see if you purchase the pattern. I don't want you to go in blind sort of speak. At least this way you have an idea of what the pattern may be.
TIPS
If
you're new to knitting cables and you need some advice on the needle to use....I don't use
the cable needles you see in stores. There are a couple of reasons.
I've never found a straight one. What I use is a blue yarn needle
that is sold in just about every store. If you were to use a straight
metal yarn needle the stitches would fall right off. When I use the
plastic kind I have no problems. They do sell the metal cable needles
that look like wings and a hook. I can't hold them properly and they
get caught on the yarn. Find what works best for you.
Another
tip……When
doing cables I only use circular needles. This way the when working
with the cable needle I don’t have to worry about the left knitting
needle falling down, It's hard to keep everything in place with
straight needed. When using circulars everything is connected. That's
just my opinion if straight needles work for you by all means use
them.
INFORMATION:
The picture you see below shows you the slip stitch pattern that borders the cable design.You can see the columns of V's. This pattern makes it nice and snug without ever being uncomfortable. That also means that it won't move around on you. It also keeps it's shape as you take it on and off.
Yarn
used: Bernat Berella “4” or any soft worsted weight yarn
Color:
Natural (cream color)
CO:
29
Finished
Size: 6 inch width 9 inches tall
Gauge:
4.75 stitches per inch
US
size 10.5 needle
Amount of Yarn: 70-80 yards for both
Amount of Yarn: 70-80 yards for both
ABBREVIATIONS
WYIB:
with yarn in back (as if to knit)
S1:
Slip 1 (always purl wise)
C6B:
Slip 3 to cable needle and hold in back, K3 then K3 from cable needle
C6F:
Slip 3 to cable needle and hold in front, K3 then K3 from cable
needle
**********
VIDEOS on how to do the Cable in case you need them see the links below....
Left Cross Over (C6F)
Right
Cross Over (C6B)
Finishing and Sewing instructions included in the pattern.
This is the sewing technique I use when sewing my arm warmers together.
This is the sewing technique I use when sewing my arm warmers together.
Thanks!!
Heather
Heather
Sunday, April 5, 2009
Split Granite Afghan - Twin Size Blanket
![]() |
| Closeup |
4-14-09 I updated the PDF with the amount of yarn that's needed for the afghan.
This simple knitted afghan fits a twin size bed. It is made up of 42, (6 x 9 1/2inch) rectangles. I knitted 6 columns, made up of 7 rectangles, then sewed them side-to-side.I used Bernat Softee Chunky yarn. It's SO soft, I love it. It's the most comfortable blanket I own. Feel free to download the pattern below.
Download PDF here
Thanks!!
Heather
Tuesday, February 17, 2009
Woven Ties Cable
This pattern measures 6 inches wide by 9 inches high. This is not a complicated pattern even
though it may look like one. You’re only using the cable needle twice in every repeat of
rows 1-12.
CO: 30 stitches
Yarn: Caron 1 pound Blue
Rows: 52
MATERIALS NEEDED:
-US size 10.5 needle
-35 to 40 yards of worsted weight yarn
-Cable needle of your choice
GAUGE, in Stockinette Stitch:
5 stitches per 1 inch
5 ¾ rows per 1 inch
ABBREVIATIONS:
C8B= Slip 4 stitches and hold in back, K4 then K4 from cable needle
C8F= Slip 4 stitches and hold in front, K4 then K4 from cable needle
Moss Stitch=On Right Side rows..(K1 P1) repeat across row.
On Wrong Side rows..Knit the purls and purl the knits
PATTERN:
Rows
1: K3,
P4, K16, P4, K3
Rows
2, 4,6 ,8 ,10 ,12:
K7, P16, K7
Row
3:
K3,
P4, K16, P4, K3
Row
5:
K3,
P4, C8B,
C8B,
P4, K3
Row
7:
K3,
P4, K16, P4, K3
Row
9:
K3,
P4, K16, P4, K3
Row
11:
K3,
P4, K4, C8F,
K4, P4, K3
C8B=
Slip 4 stitches and hold in back, K4 then K4 from cable needle
C8F=
Slip 4 stitches and hold in front, K4 then K4 from cable needle
1-12
x 4
then
1-4
Chain 30
Monday, February 16, 2009
Crossed Arrow Cable Stitch Pattern
CROSSED ARROW CABLE KNIT PATTERN
It looks difficult but it's actually an easy cable pattern. It's the crossed arrow cable stitch pattern. CO 28 stitches for a 6 inch width. For a 9 inch height I repeated rows 1-16, 2 times total, then did rows 1-12. I used a 10.5 needle.
Find pattern HERE or see below
MATERIALS NEEDED:
- 10.5 needle (or size needed to obtain gauge)
- Cable Needle
- 30-40 yards of yarn
Gauge: 4 ½ stitches per inch and 5 ¼ rows per inch
CO: 28 stitches
Repeat rows 1-16 3 times total
Rows: 48
Abbreviations:
C4F= Slip 2 stitches and hold in front, Knit 2 then knit 2 from the
cable needle
C4B= Slip 2 stitches and hold in back, Knit 2 then knit 2 from the
cable needle
T2F= Slip 1 stitch and hold in front, Purl 1 then Knit 1 from the
cable needle
T2B= Slip 1 stitch and hold in back, Knit 1 then Purl 1 from the
cable needle
Moss Stitch=
On RS rows (K1 P1) repeat
On WS rows you knit the purls and purl the knits
PATTERN:
The cable pattern is what is in parenthesis in case you want to change the bordering stitches
(RS) Rows 1,3,5,7: 4 moss, P3, (K4 P2 K2 P2 K4) P3, 4 moss
(WS) Rows 2,4,6,8,10,14: 4 moss, K3 (P4 K2 P2 K2 P4) K3, 4
moss
Row 9: 4 moss, P3 (C4F P2 K2 P2 C4B) P3, 4 moss
Row 11: 4 moss, P3 (K2 C4F K2 C4B K2) P3, 4 moss
Row 12: 4 moss, K3 ( P14 ) K3, 4 moss
Row 13: 4 moss, P3 (K4 P1 T2F T2B P1 K4) P3, 4 moss
Row 15: 4 moss, P3 (K4 P2 K2 P2 K4), P3, 4 moss
Row 16: 4 moss, K3 (P4 K2 P2 K2 P4) K3, 4 moss
Like I said before, for 9 inches just repeat rows 1-16, 3 times total.
Bind off, Weave in the ends.
(The even # rows are "knit the knit stitches and purl the purl stitches")
Sunday, February 8, 2009
3 Strand Cable with Ribbing
This is called the 3 stranded "braid" knitted cable stitch pattern.
This piece is 6 x 9 inches. I made it this way because of a charity BUT you may just want to use the cable pattern itself. That way you can change the surround stitches. If that's the case, I have the cable pattern in a dark red font in bold.
The instructional PDF, if you wish to download it, is available immediately (no wait) at http://www.mediafire.com/download/n9kxrvor46eo40m/3_stranded_w_ribbing.pdf
This piece is 6 x 9 inches. I made it this way because of a charity BUT you may just want to use the cable pattern itself. That way you can change the surround stitches. If that's the case, I have the cable pattern in a dark red font in bold.
The instructional PDF, if you wish to download it, is available immediately (no wait) at http://www.mediafire.com/download/n9kxrvor46eo40m/3_stranded_w_ribbing.pdf
I was a beginner knitter when I started doing cables. It take just a little practice. This
is a good beginner cable pattern. I say that because you are only using the cable needle
every other Right Side row. I surrounded the cable pattern with ribbing and
moss stitch.
Materials
Needed:
Size
10.5 needle
Cable
Needle
Approx. 40 yards of worsted weight yarn
Other
Notes:
CO:
27
Gauge
(In Stockinette Stitch) is 4.5 stitches and 5 rows per inch
Stitches
Used:
Cable-
see below
Moss
stitch - For the moss stitch border you will (K1 P1)x2 on the Right Side rows
and
you will knit the purls and purl the knits on the Wrong Side rows
Abbreviations:
RC
= Right cross on 6 stitches, Slip 3
Stitch to cable needle, and hold in
back.
Knit 3 stitches then knit the 3 from the cable needle.
LC
= Left cross on 6 stitches, Slip 3
Stitch to cable needle, and hold in front.
Knit
3 stitches then knit the 3 from the cable needle.
PATTERN: Cable pattern in red
(RS)Row
1, 3: 4 Moss, K3, P2, K9, P2, K3, 4 Moss
(WS)Row
2, 4: 4 Moss, P3, K2, P9, K2, P3, 4 Moss
Row
5: 4 Moss, K3, P2, K9, P2, K3, 4 Moss
Row
6, 8,10: 4 Moss, P3, K2, P9, K2, P3, 4 Moss
Row
7: 4 Moss, K3, P2, RC K3, P2, K3, 4 Moss
Row
9: 4 Moss, K3, P2, K9, P2, K3, 4 Moss
Row
11: 4 Moss, K3, P2, K3 LC, P2, K3, 4 Moss
Row
12: 4 Moss, P3, K2, P9, K2, P3, 4 Moss
Repeat
rows 5-12 for cable pattern
To
make this exact piece do Rows 1-12,
then do Rows (5 thru 12)4
times,
then finish with rows 5 & 6.
Wednesday, February 4, 2009
Loom Wool Ease Scarf
http://www.youtube.com/ in case you are new to looms.
Loom Scarf made with a circular loom. I used Lionbrand Wool Ease Quick and Thick. "Fisherman" I used the entire skein. You might want to buy 2 if you want a longer scarf. With 1 skein it measured 42 inches long. It's 6 1/4 width when using 16 posts. It was done in stockinette stitch using the "knit over" stitch. I included links to instructional videos from
Sunday, January 11, 2009
Drifting Lattice Scarf
I alternated a stockinette stitch pattern along with a lace lattice stitch pattern to create this scarf. I used 1 skein, the entire skein, of Encore “Drifting” # 7744 yarn to create it. I only do easy lace patterns so this is definitely a beginner lace pattern. I also created a 4 garter stitch border on each side of it. Most people do all knit stitches when doing a garter stitch but I do all purls so that’s why you see P4 at the beg and end of each row.
CO: 27 Stitches
Finished Size: 7 x 47 inches
US size 10 needles
Row Schedule
Rows 1 - 36 Lace Lattice Pattern
Rows 37 - 66 Stockinette Stitch
Rows 67 - 102 Lace Lattice Pattern
Rows 103 - 142 Stockinette Stitch
Rows 143 - 162 Lace Lattice Pattern
Rows 163 - 198 Stockinette Stitch
Rows 199 - 234 Lace Lattice Pattern
Rows 235 - 264 Stockinette Stitch
Abbreviations:
(S1 K1 PSSO) -This is a decrease. You will slip 1 purl wise, then Knit 1 stitch and slip the slipped
stitch over the knit stitch.
YO - Yarn over - For instructions click here
*-* Repeat the instructions between them
Lace Lattice Pattern for this scarf:
When you get to the rows where you knit this pattern you will repeat rows 1-12 a total of 3 times which equals the 36 rows needed.
Row 1: P4, K1, K2tog, K1 YO,K1 (S1 K1 PSSO) K2, K2tog, K1,YO, K1 (S1 K1 PSSO) K4, P4
Rows 2, 4, 6, 8, 10, 12: Purl all
Row 3: P4, K2tog, K1, (YO, K1)x2, (S1 K1 PSSO), K2tog, K1, (YO, K1)x2,(S1 K1 PSSO)K3, P4
Row 5: P4, K2, YO, K3, YO, K1 (S1 K1 PSSO) K1, YO, K3, YO, K1 (S1 K1 PSSO) K2, P4
Row 7: P4, K4, K2tog, K1,YO,K1, (S1 K1 PSSO), K2, K2tog, K1, YO, K1, (S1 K1 PSSO), K1, P4
Row 9: P4, K3, K2tog, K1, (YO K1)x2, (S1 K1 PSSO), K2tog, K1, (YO K1)x2, (S1 K1 PSSO) , P4
Row 11: P4, K2, K2tog, K1, YO, K3, YO, K1, K2tog, K1, YO, K3, YO, K2, P4
Row 12: Purl all
Stockinette Stitch Pattern:
When you get to the rows where you knit this pattern you will:
Row 1: P4, K19, P4
Row 2: Purl all
Repeat Rows 1 and 2 as specified on the scheduled rows on page 1. End on a purl row.
Thursday, January 1, 2009
Two Toned Felted Knit Bag
Whip up a knitting bag really fast with this tote. I made it in two pieces, front and back, and sewed the sides together. I used garter stitch. So you can do all knit stitches or all purl stitches.
I did. 86 rows and casted on 30 using a 10.5 needle. Make the strap several inches smaller then what you need because it will stretch when it's in the wash. Mine was so long that I had to put it on the inside, touching the bottom of it and sewed it in. I don't add the strap before washing it because I can't change the size of it. If I wash it separately I can make sure it's the size I need.
Find instructions here
Thanks!
Heather
Heather
Sunday, December 28, 2008
Paton's Pooch Neck Warmer
This neckwarmer couldn't be easier to make. Simple Garter Stitch. This is made flat, not in the round.
Main Blog Page http://www.knitting2008.blogspot.com/My ETSY Store: http://heatherg23.etsy.com/
Friday, December 12, 2008
Scarf's Bernat Soft Boucle
These are 2 scarfs that can be made very quickly. They can be made in about 3 hours. I used US size 13 needles. Casted on 18 stitches. The finished size is 6 1/2 in by 50 in. The names of the yarn were "Mauve Shades" purple scarf to the left and "Beautiful Blue" to the right. I used Bernat Boucle Yarn that can be found at Michael's.
I did simple garter stitch. You can either knit every row or purl every row.
Friday, December 5, 2008
Open Rope Cable Twists
Measures 6 x 9 inches
CO: 28 stitches, 19 rows and 19 sts equal 4 inches. 10.5 needle used. Very basic cable instructions, nothing difficult. I used Bernat Worsted yarn.
Find Instructions HERE
Thursday, November 27, 2008
Crossing Paths
The cable pattern is bordered by moss stitch. It starts out as ribbing then goes into the wovan cable pattern. Very easy!
CO: 29
Height is 9 in.
Width at top and bottom is 7 in., the center is 6 in.
Thursday, November 13, 2008
Arm Warmer Pebble Blue
Pebble
Blue Arm Warmer
Pebble Blue Knitted Arm Warmer
Have fun creating this
beginner knitted arm warmer pattern. Just repeat the same 4
rows for as long as you want the arm warmer to be.
It’s not a lace pattern but sometimes it can look like it is. The
larger the needle the more there is a “lace” effect. You're basically making a rectangle and sewing the edges together. The entire pattern is below.
When it comes to size I add 1/2 inch to the size of the wrist of the person wearing it.
If you're looking for a challenge you can try these Cabled Arm Warmers. They include Serpentine Cable Arm Warmer, Soft Cabled Arm Warmer, "Warm Me Up" Braid Cable, Waves Arm Warmer, Slow and Easy Cabled Arm Warmer and more.
IF you want a thumb hole see the instructions in the section "Sewing your arm warmer together" #5.
When it comes to size I add 1/2 inch to the size of the wrist of the person wearing it.
If you're looking for a challenge you can try these Cabled Arm Warmers. They include Serpentine Cable Arm Warmer, Soft Cabled Arm Warmer, "Warm Me Up" Braid Cable, Waves Arm Warmer, Slow and Easy Cabled Arm Warmer and more.
It's made flat and then the sides are sewn together.
Skill Level:
Beginner
CO: 25 sts
Needle Size: 11 US
Finished Size:
6 inches width.
ABBREVIATIONS:
WYIF = Bring yarn in
front, as if to purl
S1: Slip 1 stitch, as if
to purl
* * = Repeat
instructions between them
PATTERN:
You need an uneven number of stitches for this pattern
Row 1: P1, * K1, P1*
Row 2: K1 *WYIF, S1, K1*
Row 3: K1 * P1, K1*
Row 4: K2 *WYIF, S1 K1*
REPEAT ROWS 1-4 as needed
FINISHING
- It’s important to do a loose bind off or it will squeeze your hand/arm. That's not to comfortable, trust me. I've made that mistake a couple of times.
- I always do a purl bind off no matter what stitch the last row is comprised of. It's so much more attractive then a knitted one. It's up to you.
- When you end your last row cut your yarn and leave a tail. You will tie a knot to secure the sewing and then you can weave it in.
Sewing your arm warmer together
If you have your own method of sewing by all means do
that. If you need instructions then I can tell you how to sew it
together.
Place
the arm warmer with the right side facing down. Then
take the sides and fold them in ward. Pin the top of it as you're
working.
- Now thread your yarn needle.
- Start sewing by threading your needle through the purl bump closest to the edge then put your needle through the purl bump closest to the edge on the opposite side. Pull the yarn through leaving about 4 inches and tie a loose knot (so it doesn't squeeze your wrist). Then tie another knot tightly to secure the first one.
- Now, whatever side your yarn needle is on, **go up a little and put your yarn needle through the purl bump closest to the edge and go straight across to the other side and do the same.** repeat the instructions between the asterisks. The diagram shows how to do it.
- Pull tight every couple of inches.
5. You can also
pin where the
thumb hole is
going to be, if you want one. To
do that lay it flat and slip your hand in it just like you would when
wearing it. Use 2 safety pins where you want the beginning and end to
be. When you get to the 1st safety pin weave the yarn into the sides
until you get to the top pin and continue sewing again.
When
you get to the very top do the last stitch and pull it tight, but not so tight that it hurts your arm, and tie a knot if you have a tail from when you finish your
warmer.
Hope you try it sometime. Let me know if you have any questions.
Hope you try it sometime. Let me know if you have any questions.
Thanks!!
Heather
Wednesday, November 12, 2008
Heather's Cabled Purse
This is an easy cable patterned purse. Definetly a beginner pattern. In the pattern instructions I included video links to some techniques if you choose to do them. It's made flat, then folded in half.
Find instructions at http://www.mediafire.com/?8vd44l8vfhafof7 Updated 3/31/12
All the instructions ca be found in that document.
Thursday, November 6, 2008
Double Patterned Cable Moss Stitch Pattern
This is the easiest of all cable patterns. It has a lot of moss stitch. The finished size is 6 x 9 inches. CO 24 sts. . Your using the cable needle 1 time.
.
**VIDEO:** How to do the Knit stitch:
http://youtu.be/6y-yC_qbXhc
**VIDEO:** How to do the Purl stitch:
http://youtu.be/E3wUDbhSaL4
**How to Cable-Video**
LEFT CROSS:
http://www.youtube.com/watch?v=YZYKWm0JtEI
RIGHT CROSS:
https://www.youtube.com/watch?v=xxulTZA1cLA
Tuesday, November 4, 2008
Ribbed cable stitch pattern
You only have to use a cable needle twice on this cable stitch pattern.
CO 30
Size: 6 in x 9 inches
Yards: 30-40 yard of yarn needed.
This is a large ribbed cable with a moss border. You only need to use the cable needle twice. The only difficult thing about the cable is that it is a large cable. That makes it very tight when trying to do it. If youre having trouble getting you needle tip into those cable stitches push up all the stitches on the right needle. That gives you more room to maneuver. The cable pattern will be below the pattern instructions.
CO: 30
Finished Size: 6 x 9 inches
Rows Completed: 44
Yards: Need about 30-40 yards of yarn
Abbreviations:
C14F = Slip 7 stitches hold in the front, k7 then k7 from cable needle
C14 rib = Slip 6 stitches hold in front, K2 P2 K2 P2 then K2 P2 K2 from the
cable needle
Moss stitch = For odd # rows = K1 P1 across the row. For even # rows = Knit the Purls and Purl the Knits
PATTERN
ROWS 1,3,5,7,9,11,13,15,17: 5 moss, P3, (K2P2)3 times, K2, P3, 5 moss
ROWS 2,4,6,8,10,12,14,16,18: 5 moss, K3, P2 (K2P2)3 times,K3, 5 moss
ROW 19: 5 moss, P3, C14F, P3, 5 moss
ROW 20: 5 moss, K3, P14, K3, 5 moss
ROWS 21,23,25,27,29: 5 moss, P3, K14, P3, 5 moss
ROWS 22,24,26,28,30: 5 moss, K3, P14, K3, 5 moss
ROW 31: 5 moss, P3, C14 rib, P3, 5 moss
ROW 32: 5 moss, K3, P2 K2 P2 K2 P2 K2 P2, K3, 5 moss
ROWS 33,35,37,39,41,43: 5 moss, P3 (K2 P2)3 times, K2, P3, 5 moss
ROWS 34,36,38,40,42,44: 5 moss, K3, P2 (K2 P2)3times, K3 5 moss
CABLE PATTERN:
ROWS 1,3,5,7,9,11,13,15,17: (K2P2)3 times, K2
ROWS 2,4,6,8,10,12,14,16,18: P2 (K2P2)3 times
ROW 19: C14F
ROW 20: P14
ROWS 21,23,25,27,29: K14
ROWS 22,24,26,28,30: P14
ROWS 31: C14F
ROWS 32: P2 K2 P2 K2 P2 K2 P2
ROWS 33,35,37,39,41,43: (K2 P2)3 times, K2
ROWS 34,36,38,40,42,44: P2 (K2 P2)3times
Hope you give it a try!
Heather
Wednesday, October 29, 2008
Easy Neck Warmer - 2 toned
Pooch Neck Warmer
Very easy stitch pattern to follow for 18 inches. Only have to cast on 22 stitches.
Very much a beginner pattern made flat. 10.5 needle size used. When done all you have to do is sew the ends togethor and you have your neck warmer.
I used Garter Stitch for this neck warmer. So you can either knit every row or purl every row.
Thanks for visiting
Heather
I used Garter Stitch for this neck warmer. So you can either knit every row or purl every row.
Thanks for visiting
Heather
Monday, October 6, 2008
Fabric Stitch Arm Warmer
If you're looking for a challenge you can try these Cabled Arm Warmers. They include Serpentine Cable Arm Warmer, Soft Cabled Arm Warmer, "Warm Me Up" Braid Cable, Waves Arm Warmer, Slow and Easy Cabled Arm Warmer and more.
For my Free Arm Warmer patterns go to :
http://knitting2008.blogspot.com/2008/11/arm-warmer-pebble-blue.html
http://knitting2008.blogspot.com/2008/08/slip-stitch-arm-warmer.html
It's made flat and then the sides are sewn together.
CO:
24
Yar: Caron
1 Pound
Needle
Size: US 11
Rows
Completed: 49 rows
Size: 6
x 9 inches
Amount
of Yarn: 60 yards for both
ABBREVIATIONS:
WYIF =
With Yarn in Front (as if to purl)
S1 =
Slip 1 stitch
*
*= Repeat the instructions between them
PATTERN:
It calls for an even amount of stitches
Row
1: *K1, WYIF S1* end with K2
Rows
2 & 4: Purl
Row
3: K2 *WYIF S1, K1*
FINISHING
- It’s important to do a loose bind off or it will squeeze your hand/arm. That's not to comfortable, trust me. I've made that mistake a couple of times.
- I always do a purl bind off no matter what stitch the last row is comprised of. It's so much more attractive then a knitted one. It's up to you.
- When you end your last row cut your yarn and leave a tail. You will tie a knot to secure the sewing and then you can weave it in.
Sewing
your arm warmer together
If
you have your own method of sewing by all means do that. If you need
instructions then I can tell you how to sew it together.
Place
the arm warmer with the right side facing down. Then take the
sides and fold them in ward. Pin the top of it as you're working.
- Now thread your yarn needle.
- Start sewing by threading your needle through the purl bump closest to the edge then put your needle through the purl bump closest to the edge on the opposite side. Pull the yarn through leaving about 4 inches and tie a loose knot (so it doesn't squeeze your wrist). Then tie another knot tightly to secure the first one.
- Now, whatever side your yarn needle is on, **go up a little and put your yarn needle through the purl bump closest to the edge and go straight across to the other side and do the same.** repeat the instructions between the asterisks. The diagram shows how to do it.
- Pull tight every couple of inches.
5.
You can also pin where the thumb
hole is
going to be, if you want one. To
do that lay it flat and slip your hand in it just like you would when
wearing it. Use 2 safety pins where you want the beginning and end to
be. When you get to the 1st safety pin weave the yarn into the sides
until you get to the top pin and continue sewing again.
When
you get to the very top do the last stitch and pull it tight, but not
so tight that it hurts your arm, and tie a knot if you have a tail
from when you finish your warmer.
Hope
you try it sometime. Let me know if you have any
questions.
Thanks!!
Heather
Monday, September 22, 2008
Easy Cabled Arm Warmer #8
CABLED ARM WARMER- KNITTED FLAT
It's definitely a favorite of mine. I usually don't do other people's patterns because I like to make up my own but this one I had to do. I've never been able to find one that like. It's really pretty. Follow the link above.
Heather
Thursday, September 18, 2008
Honeycomb Cabled Arm Warmer
HoneyComb Knitted Arm Warmer
$3.00
This is a knitted Honeycomb cabled arm warmer. This is a cable pattern that is good for a beginner. It’s a basic cable. The only difference with my other cable arm warmers is that you are using the cable 2 times back-to-back within the row. Cables are only in two out of every 8 rows and I only completed 44 rows for the length you see in the purple example. I did 1 more honeycomb on the tan one. All the stats below are for the purple. The underside is explained under the Pattern Heading but you can see a photo of it at the end of this PDF. To increase the size see instructions above row 1.
Cable Videos to help you out if needed.:
Left Cross: http://www.youtube.com/watch?v=YZYKWm0JtEI
TIPS:
If you're new to knitting cables and you need some advice on the needle to use. I don’t use the cable needles you see in stores. That’s because I have never found a straight one. What I use is a blue “yarn needle” that is sold in just about every store. Another reason why I use it is because it’s not metal which can cause the stitches to slip right off. When I use the plastic kind I have no problems. Those stitches don’t more. So I guess I’m glad they don’t sell straight ones because I would never use it. Stitches need to stay on not slip off.
Another tip……When doing cables I only use circular needles. This way the when working with the cable needle I don’t have to worry about the left knitting needle falling down, It's hard to keep everything in place with straight needed. When using circulars everything is connected. That's just my opinion if straight needles work for you by all means use them.
Finishing Instructions along with sewing instructions will be included. This technique is an option for you....
Needle Size: 10.5
CO: 30
Rows: 44
Yards needed: Approx. 65-75 yards
Finished Size: 7 inch tall 6.5 inch wide
Gauge:4.62 stitches per inch and 6.2 rows per inch
Made Flat Not in the Round
ABBREVIATIONS:
WYIB S1 =With yarn in back (as if to knit) Slip 1 (as if to purl)
LC= Left Cross cable, Slip 2 to cable needle and hold in front, K2 then K2 from cable needle
RC= Right Cross cable, Slip 2 to cable needle and hold in back, K2 then K2 from cable needle
--------------------------------------------------------------------------------------------------------------------------
Tto Purchase this Arm Warmer Pattern:
http://www.ravelry.com/patterns/library/honeycomb-cabled-winter-arm-warmer
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the "Buy Now" link below. Please do not distribute this pattern to the public.
If you have any problems going through
the link you can let me know by leaving a comment.
Thanks,
Heather
Subscribe to:
Posts (Atom)




.jpg)
.jpg)

.jpg)





.jpg)
.jpg)

.jpg)
.jpg)





.jpg)
.jpg)






