Showing posts with label Arm warmer. Show all posts
Showing posts with label Arm warmer. Show all posts

Tuesday, October 11, 2016

Wavy Braid Knit Cabled Arm Warmer




Wavy Braid Knit Arm Warmer

Knit Video: Wavy Braid Video here


This is a wacky knit cable pattern turned Arm Warmer.  I wanted to do something a little different then the ones I've done in the past...click here to see them.

A beginner can do cables it's not just for the advanced. As soon as I learned how to do the knit and purl stitches I started with cables. Practice makes perfect.  Don't get frustrated if it doesn't work out the first time. I had to experiment with cable needles to see which ones worked best. I use the blue yarn needles that are sold at stores like Hobby Lobby and Walmart. Not the small ones but the large ones. I use them because #1 They are plastic. The metal ones are to slick. The stitches will fall right off. #2 They don't sell straight cable needles. #3 I can't use the winged type or the hook styled needles.


UNDERSIDE
You can see a better picture of the cable at the end of this post. I also posted it so you can see the surrounding stitches. I use a slip stitch that makes the underside. It's like elastic meaning that you can can take it on and off without stretching it out. Your arm warmer will stay put but be comfortable at the same time.
  • Skill Level: Experienced Beginner
  • Uses the cable needle 3 times in 20 rows
  • Made Flat, sewn up


ABBREVIATIONS:
4RC = Slip 2 stitches and hold in the back. Knit 2 stitches from your knitting needle, then knit 2 from the cable needle.
6RC = Slip 3 stitches and hold in the back. Knit 3 stitches from your knitting needle and 3 from your cable needle.
4LC = Slip 2 stitches and hold in the front. Knit 2 stitches from your knitting needle and 2 from your cable needle.
6LC = Slip 3 stitches and hold in the front, Knit 3 stitches from your knitting needle and 3 from your cable needle

Chain: 26
Needle Size: 10.5
Size of Arm Warmer
Gauge
Amount of Yarn: 60-70 yards per set

Row 1, 3: P1([WYIB S1, P1)x3, P5, K6, P2 (WYIB S1, P1)x3

Row 2, 4: P6, K2, P6, K5, P7  

Row 5: P1([WYIB S1, P1)x3, P5, K2, 4RC, P2 (WYIB S1, P1)x3

Row 6: P6, K2, P6, K5, P7  

Row 7: P1([WYIB S1, P1)x3 P5, K6, P2, (WYIB S1, P1)x3

Row 8: P6, K2, P6, K5, P7 

Row 9: P1([WYIB S1, P1)x3, P2, 6RC, P5, (WYIB S1, P1)x3

Row 10: P6, K5 ,P6, K2, P7   

Row 11: P1 ([WYIB S1, P1)x3, P2, K6, P5, (WYIB S1, P1)x3

Row 12: P6, K5 ,P6, K2, P7   

Row 13: P1([WYIB S1, P1)x3, P2, K2, 4LC, P5, (WYIB S1, P1)x3

Row 14: P6, K5, P6, K2, P7  

Row 15: P1([WYIB S1, P1)x3 , P2, K6, P5, (WYIB S1, P1)x3

Row 16: P6, K5, P6, K2, P7

Row 17: P1([WYIB S1, P1)x3, P5, 6LC, P2, (WYIB S1, P1)x3.

Row 18: P6, K5, P6, K3, P7

Row 19: P1([WYIB S1, P1)x3 P5, K6, P2, (WYIB S1, P1)x3

Row 20: P6, K5, P6, K3, P7

Repeat rows 5-20

I completed rows 1-20 then 5-20. You can continue on as needed




Wednesday, September 17, 2014

6 Arm Warmer Patterns for sale

Below are the 6 Arm Warmer Patterns currently for sale on Ravelry. The links are below their pictures. You do not need a Ravelry account to purchase the pattern. They are only $3.00

Serpentine Cabled Arm Warmer 





 Slow and Easy cabled Arm Warmer



 and...
Warm Me Up Arm Warmer



Honeycomb Cabled Arm Warmer



Waves Arm Warmer


 and.......
Soft Cabled Arm Warmer



Thank you for visiting and please stop by again!

Heather

Saturday, September 25, 2010

Serpentine Cable Arm Warmer



Serpentine Knit Cabled Arm Warmer

$3.00

This is a very easy arm warmer even if you haven't made a cable pattern
before. It’s truly a 3D pattern. It's really fun to make. You don't have to be an expert to knit cables. It's the first thing I tried after learning all the basics. This arm warmer, along with all my other warmers, this is made flat and not with circulars. There are detailed instructions on how to sew the sides together if you purchase the pattern.

Tips:
If you're new to knitting cables....I don't use the cable needles you see in stores. There are a couple of reasons. I've never found a straight one. What I use is a blue yarn needle that is sold in just about every store. If you were to use a straight metal yarn needle the stitches would fall right off. When I use the plastic kind I have no problems. They do sell the metal cable needles that look like wings and a hook. I can't hold them properly and they get caught on the yarn. Find what works best for you.


Another tip……When doing cables I only use circular needles. This way the when working with the cable needle I don’t have to worry about the left knitting needle falling down,  It's hard to keep everything in place with straight needed. When using circulars everything is connected. That's just my opinion if straight needles work for you by all means use them.

To create this pattern I completed rows (1 to 12) 4 times, then finished with
rows 1-8. You can make it as long as you wish without interrupting the design. 

The underside is all stockinette stitch except for a purl stitch at the beginning
and end of each row (RS). To make it easy to sew the sides together. 


Yarn: Encore (Baby Blue) or any soft Worsted Weight Yarn
CO: 28
Yards: 70 , for the pair
Rows: 44
Finished Size: 7 inches wide, 9 inches tall (Customizable)
Needle Size: 10.5
Gauge: 4 stitches per inch , 5 rows per inch

ABBREVIATIONS:
C6F = Slip 3, hold to the front, K3 from your knitting needle then K3 from
the cable needle
C6B = Slip 3, hold to the back, K3 from your knitting needle then K3 from
the cable needle


Cable Videos to help you out if needed.: 
Left Cross: http://www.youtube.com/watch?v=YZYKWm0JtEI
Right Cross:http://www.youtube.com/watch?v=xxulTZA1cLA


*******************************************
to Purchase
http://www.ravelry.com/patterns/library/serpentine-cable-knit-arm-warmer
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the "Buy Now" link below. Please do not distribute this pattern to the public.



Thanks so much!
Heather

Wednesday, December 16, 2009

The Waves Arm Warmer


To purchase this Arm Warmer Pattern:
http://www.ravelry.com/patterns/library/waves-arm-warmer-2
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the "Buy Now" link below. Please do not distribute this pattern to the public.


This is a knitted arm warmer that used increases and decreases to shape the design. It's okay if you're a beginner because I was. I had never done increases and decreases before.

I used a slip stitch type pattern for the underside for several reasons. It will be nice and snug but very comfortable. You can also take it on and off without stretching it out. It's nice and durable.

Below are some of the information you will find in the instructions. 

Made Flat, not in the round. You will sew the sides together. The instructions will show and easy way to do so.

Skill Level: Experienced Beginner
CO: 25
Finished Size: 6 in wide x 8.5 in high
Yarn: I used Bernat Worsted in Blue
Yard of yarn needed: 60 for the pair of them
Needle Size: I used 10.5

Stitches Used
Increases 
Inc 1 = Increase 1 stitch by picking up and knitting connecting strand
between last stitch worked and the next one.

Decreases:
S1 K1 PSSO =Slip 1 , Knit 1 then pass the slip stitch over the knitted 1.
K2tog = Knit 2 stitches together

Other Abbreviations (underside, see picture below:
(WYIF, S1, P1)= Stands for “With Yarn In Front” Slip 1 stitch then Purl 1
stitch
S1 = Slip 1 stitch as if to purl






Thanks,
Heather


Thursday, October 8, 2009

2nd "Warm Me Up" Arm Warmer


$3.00
Purchase here
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the buy now link below.
Cost: $3.00



This is a braid styled Knit Arm warmer that I call the "Warm me Up" arm warmer. This is a cabled design.  I do consider this a beginner pattern because I just learned how to knit and the cable designs were the first thing I wanted to try.

I wanted to give you some tips along with some information that you will see if you purchase the pattern. I don't want you to go in blind sort of speak. At least this way you have an idea of what the pattern may be.

TIPS
If you're new to knitting cables and you need some advice on the needle to use....I don't use the cable needles you see in stores. There are a couple of reasons. I've never found a straight one. What I use is a blue yarn needle that is sold in just about every store. If you were to use a straight metal yarn needle the stitches would fall right off. When I use the plastic kind I have no problems. They do sell the metal cable needles that look like wings and a hook. I can't hold them properly and they get caught on the yarn. Find what works best for you.


Another tip……When doing cables I only use circular needles. This way the when working with the cable needle I don’t have to worry about the left knitting needle falling down,  It's hard to keep everything in place with straight needed. When using circulars everything is connected. That's just my opinion if straight needles work for you by all means use them.

This pattern is made flat, not in the round. Sewing instructions included.

INFORMATION:
  The picture you see below shows you the slip stitch pattern that borders the cable design.You can see the columns of V's. This pattern makes it nice and snug without ever being uncomfortable. That also means that it won't move around on you. It also keeps it's shape as you take it on and off. 


Yarn used: Bernat Berella “4” or any soft worsted weight yarn
Color: Natural (cream color)
CO: 29
Finished Size: 6 inch width 9 inches tall
Gauge: 4.75 stitches per inch
US size 10.5 needle
Amount of Yarn: 70-80 yards for both

ABBREVIATIONS
WYIB: with yarn in back (as if to knit)
S1: Slip 1 (always purl wise)
C6B: Slip 3 to cable needle and hold in back, K3 then K3 from cable needle
C6F: Slip 3 to cable needle and hold in front, K3 then K3 from cable needle

**********

VIDEOS on how to do the Cable in case you need them see the links below.... 
Left Cross Over    (C6F)
Right Cross Over  (C6B)


Finishing and Sewing instructions included in the pattern. 
This is the sewing technique I use when sewing my arm warmers together.

Thanks!!
Heather

Thursday, November 13, 2008

Arm Warmer Pebble Blue


Pebble Blue Arm Warmer

Pebble Blue Knitted Arm Warmer

Have fun creating this beginner knitted arm warmer pattern. Just repeat the same 4 rows for as long as you want the arm warmer to be. It’s not a lace pattern but sometimes it can look like it is. The larger the needle the more there is a “lace” effect. You're basically making a rectangle and sewing the edges together. The entire pattern is below. 

When it comes to size I add 1/2 inch to the size of the wrist of the person wearing it. 

If you're looking for a challenge you can try these Cabled Arm Warmers. They include Serpentine Cable Arm Warmer, Soft Cabled Arm Warmer, "Warm Me Up" Braid Cable, Waves Arm Warmer, Slow and Easy Cabled Arm Warmer and more.

It's made flat and then the sides are sewn together.

IF you want a thumb hole see the instructions in the section "Sewing your arm warmer together" #5.

Skill Level: Beginner

CO: 25 sts

Needle Size: 11 US

Finished Size: 6 inches width. 

ABBREVIATIONS:
WYIF = Bring yarn in front, as if to purl
S1: Slip 1 stitch, as if to purl
* * = Repeat instructions between them

PATTERN:
You need an uneven number of stitches for this pattern 

Row 1: P1, * K1, P1*
Row 2: K1 *WYIF, S1, K1*
Row 3: K1 * P1, K1*
Row 4: K2 *WYIF, S1 K1*

REPEAT ROWS 1-4 as needed


FINISHING
  1. It’s important to do a loose bind off or it will squeeze your hand/arm. That's not to comfortable, trust me. I've made that mistake a couple of times.
  2. I always do a purl bind off no matter what stitch the last row is comprised of. It's so much more attractive then a knitted one. It's up to you.
  1. When you end your last row cut your yarn and leave a tail. You will tie a knot to secure the sewing and then you can weave it in.


Sewing your arm warmer together

If you have your own method of sewing by all means do that. If you need instructions then I can tell you how to sew it together.

Place the arm warmer with the right side facing down. Then take the sides and fold them in ward. Pin the top of it as you're working.

  1. Now thread your yarn needle.
  1. Start sewing by threading your needle through the purl bump closest to the edge then put your needle through the purl bump closest to the edge on the opposite side. Pull the yarn through leaving about 4 inches and tie a loose knot (so it doesn't squeeze your wrist). Then tie another knot tightly to secure the first one.
  1. Now, whatever side your yarn needle is on, **go up a little and put your yarn needle through the purl bump closest to the edge and go straight across to the other side and do the same.** repeat the instructions between the asterisks. The diagram shows how to do it.
  2. Pull tight every couple of inches.

      5. You can also pin where the thumb hole is going to be, if you want one. To do that lay it flat and slip your hand in it just like you would when wearing it. Use 2 safety pins where you want the beginning and end to be. When you get to the 1st safety pin weave the yarn into the sides until you get to the top pin and continue sewing again.

When you get to the very top do the last stitch and pull it tight, but not so tight that it hurts your arm, and tie a knot if you have a tail from when you finish your warmer.

Hope you try it sometime. Let me know if you have any questions.

Thanks!!
Heather




Monday, October 6, 2008

Fabric Stitch Arm Warmer


                                     



    Beginner Fabric Stitch Knit Arm Warmer - Free

                            
                                                                         

This is a great beginner arm warmer to try because it uses Knit and Purl stitches only, unlike my cabled.  Even if you're experienced at knitting it is a great pattern to try

If you're looking for a challenge you can try these Cabled Arm Warmers. They include Serpentine Cable Arm Warmer, Soft Cabled Arm Warmer, "Warm Me Up" Braid Cable, Waves Arm Warmer, Slow and Easy Cabled Arm Warmer and more.
It's made flat and then the sides are sewn together.


CO: 24
Yar: Caron 1 Pound
Needle Size: US 11
Rows Completed: 49 rows
Size: 6 x 9 inches
Amount of Yarn: 60 yards for both

ABBREVIATIONS:
WYIF = With Yarn in Front (as if to purl)
S1 = Slip 1 stitch
* *= Repeat the instructions between them

PATTERN:

It calls for an even amount of stitches

Row 1: *K1, WYIF S1* end with K2
Rows 2 & 4: Purl
Row 3: K2 *WYIF S1, K1*


FINISHING
  1. It’s important to do a loose bind off or it will squeeze your hand/arm. That's not to comfortable, trust me. I've made that mistake a couple of times.
  2. I always do a purl bind off no matter what stitch the last row is comprised of. It's so much more attractive then a knitted one. It's up to you.
  1. When you end your last row cut your yarn and leave a tail. You will tie a knot to secure the sewing and then you can weave it in.



Sewing your arm warmer together

If you have your own method of sewing by all means do that. If you need instructions then I can tell you how to sew it together.

Place the arm warmer with the right side facing down. Then take the sides and fold them in ward. Pin the top of it as you're working.

  1. Now thread your yarn needle.
  1. Start sewing by threading your needle through the purl bump closest to the edge then put your needle through the purl bump closest to the edge on the opposite side. Pull the yarn through leaving about 4 inches and tie a loose knot (so it doesn't squeeze your wrist). Then tie another knot tightly to secure the first one.
  1. Now, whatever side your yarn needle is on, **go up a little and put your yarn needle through the purl bump closest to the edge and go straight across to the other side and do the same.** repeat the instructions between the asterisks. The diagram shows how to do it.
  2. Pull tight every couple of inches.

      5. You can also pin where the thumb hole is going to be, if you want one. To do that lay it flat and slip your hand in it just like you would when wearing it. Use 2 safety pins where you want the beginning and end to be. When you get to the 1st safety pin weave the yarn into the sides until you get to the top pin and continue sewing again.

When you get to the very top do the last stitch and pull it tight, but not so tight that it hurts your arm, and tie a knot if you have a tail from when you finish your warmer.


Hope you try it sometime. Let me know if you have any questions.


Thanks!!
Heather














Monday, September 22, 2008

Easy Cabled Arm Warmer #8



CABLED ARM WARMER- KNITTED FLAT
This is a great easy cable pattern. Great for a beginner knitter. It's a breeze for the advanced knitters. Made Flat. The cable pattern was created by http://www.ravelry.com/patterns/library/cabled-fingerless-gloves-5

It's definitely a favorite of mine. I usually don't do other people's patterns because I like to make up my own but this one I had to do. I've never been able to find one that like. It's really pretty. Follow the link above.


Heather

Thursday, September 18, 2008

Honeycomb Cabled Arm Warmer



HoneyComb Knitted Arm Warmer


$3.00

This is a knitted Honeycomb cabled arm warmer. This is a cable pattern that is good for a beginner. It’s a basic cable. The only difference with my other cable arm warmers is that you are using the cable 2 times back-to-back within the row. Cables are only in two out of every 8 rows and I only completed 44 rows for the length you see in the purple example. I did 1 more honeycomb on the tan one. All the stats below are for the purple. The underside is explained under the Pattern Heading but you can see a photo of it at the end of this PDF. To increase the size see instructions above row 1.

Cable Videos to help you out if needed.: 
Left Cross: http://www.youtube.com/watch?v=YZYKWm0JtEI
Right Cross:http://www.youtube.com/watch?v=xxulTZA1cLA

TIPS:
If you're new to knitting cables and you need some advice on the needle to use. I don’t use the cable needles you see in stores. That’s because I have never found a straight one. What I use is a blue “yarn needle” that is sold in just about every store. Another reason why I use it is because it’s not metal which can cause the stitches to slip right off. When I use the plastic kind I have no problems. Those stitches don’t more. So I guess I’m glad they don’t sell straight ones because I would never use it. Stitches need to stay on not slip off.

Another tip……When doing cables I only use circular needles. This way the when working with the cable needle I don’t have to worry about the left knitting needle falling down,  It's hard to keep everything in place with straight needed. When using circulars everything is connected. That's just my opinion if straight needles work for you by all means use them.

Finishing Instructions along with sewing instructions will be included. This technique is an option for you....



Needle Size: 10.5
CO: 30
Rows: 44
Yards needed: Approx. 65-75 yards
Finished Size: 7 inch tall 6.5 inch wide
Gauge:4.62 stitches per inch and 6.2 rows per inch
Made Flat Not in the Round

ABBREVIATIONS:
WYIB S1 =With yarn in back (as if to knit) Slip 1 (as if to purl)
LC= Left Cross cable, Slip 2 to cable needle and hold in front, K2 then K2 from cable needle
RC= Right Cross cable, Slip 2 to cable needle and hold in back, K2 then K2 from cable needle
--------------------------------------------------------------------------------------------------------------------------

Tto Purchase this Arm Warmer Pattern:
http://www.ravelry.com/patterns/library/honeycomb-cabled-winter-arm-warmer
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the "Buy Now" link below. Please do not distribute this pattern to the public.



If you have any problems going through the link you can let me know by leaving a comment.
Thanks,
Heather

Friday, August 29, 2008

Beginner Arm Warmer #6 Baby Blue




 
Baby Blue Knitted Arm Warmer Pattern

This arm warmer pattern is great for a beginner knitter because you only use the cable needle one time. Use a nice soft yarn so your skin doesn't get irritated.  Give it a try!

Instructions Here

If you have any questions on the pattern  please let me know!

Heather

Tuesday, August 26, 2008

Silky Purple Arm Warmer #4



This is my Silky Purple Arm Warmer pattern. It's beautiful cable pattern. It’s repeated twice as you can see in the photographs. The underside is knit with, what I call, a slip stitch ribbing. It make it really strong and holds the arm warmer in place. I have a 6 inch wrist so I made the width 6 1/2 inches.

Remember to do a loose bind off otherwise it can be tight enough to cut the circulation off in your arm. I used Vanna White yarn. Only 1 skein is needed for the pair


This is a beautiful cable pattern. Its repeated twice as you can see in the photographs. The underside is knit with, what I call, a slip stitch ribbing. It gives it extra strength in my opinion. Better than regular ribbing. The cable pattern is used on 14 sts.
If you wish to change to regular ribbing, or another design, I will post the instructions for the cable pattern itself after MY pattern on Page 3.
CO: 30 Approx. 65 yards of yarn
Yarn: Vanna White, Eggplant (purple)
Finished Size: 9 x 6.5inches
56 rows completed
Abbreviations:
WYIB = With Yarn in Back (as if to knit)
S1 = Slip 1 (as if to purl) { } = Cable Pattern
CN = Cable Needle
Supplies Needed: Cable Needle of your choose 1 Pair of knitting needles 10.5
PATTERN:
Row 1: P1,(WYIB S1 P1)x5 , P1, K6, P2, (WYIB S1 P1)x5

Row 2: P10, K2, P6, K1, P10, K1

Row 3, 27, 51: P1,(WYIB S1 P1)x5, P1, RightCross, Slip 3 stitches, hold in back, Knit 3, then K3 from CN, P2, (WYIB S1 P1)x5

Row 4, 28, 52: P10, K2, P6, K1, P10, K1

Row 5, 29, 53: P1,(WYIB S1 P1)x5, P1, K6, P2, (WYIB S1 P1)x5

Row 6, 30, 54: P10, K2, P6 K1, P10,K1

Row 7, 31, 55: P1,(WYIB S1 P1)x5, P1, K6, P2,(WYIB S1 P1)x5

Row 8, 32, 56: P10, K2, P6 K1, P10,K1

Row 9,33: P1,(WYIB S1 P1)x5 , P1,RightCross, Slip 3 stitches, hold in back, Knit 3, then K3 from CN, P2, (WYIB S1 P1)x5

Row 10,34: P10, K2, P6 K1, P10,K1

Row 11,35: P1,(WYIB S1 P1)x5, RightCross, Slip 1 stitch and hold in back, Knit 3 sts then P1 from the CN, LeftCross, S3 and hold in front, P1 then K3 from CN

Row 12,36: P10, K1, P3, K2, P13, K1

Row 13,15,17,19,21,23,37,39,41,43,45,47: P1,(WYIB S1 P1)x5, K3, P2, K3, P1,(WYIB S1 P1)x5

Row 14,16,18,20,22,24,38,40,42,44,46: P10, K1, P3, K2, P13, K1 +

Row 25,49: P1,(WYIB S1 P1)x5, LeftCross, S3 hold in front, P1 then K3 from CN, RightCross, S1 and hold in back, K3 then P1 from CN ,(WYIB S1 P1)x5

Row 26,50: P10, K2, P6, K1, P10, K1



Sewing the arm warmer by bringing the 2 sides together and sewing them. Leave enough yarn at the beginning and end to weave in the tails.

Monday, August 25, 2008

Slow and Easy Cable (Arm Warmer #2)






$3.00


This is one of my favorite arm warmer cable patterns. It has a consistent pattern which is nice because you can stop the arm warmer at any height and it won't look like you interrupted the pattern in any way.

The underside is made up of a slip stitch pattern. That makes it more durable. You can take it off and on and it won't stretch out. It's tight but comfortable at the same time.

It's great for a beginner. Cables are the first thing I dove into when I learned how to do the basics. You're doing the same cable so it won't confuse you if you are new to this kind of design.

**********
Tips:
I don't use the cable needles you see in stores. There are a couple of reasons. I've never found a straight one. What I use is a blue yarn needle that is sold in just about every store. If you were to use a straight metal yarn needle the stitches would fall right off. When I use the plastic kind I have no problems. They do sell the metal cable needles that look like wings and a hook. I can't hold them properly and they get caught on the yarn. Find what works best for you.

Also.....when doing cables I only use circular needles. This way the when working with the cable needle I don’t have to worry about the left knitting needle falling down,  It's hard to keep everything in place with straight needed. When using circulars everything is connected. That's just my opinion if straight needles work for you by all means use them.

**********

 Here is some of the information on the pattern so you have an idea of what to expect.


Made Flat, not in the round
Skill Level: Beginner with knowledge of Cables
Yarn: Caron 1 pound - Sky Blue
Finished Size: 9 inch tall by 7 inches wide.
CO: 29
Rows: 40
Amount of Yarn Needed: 60 yards approx for the pair
Needle Size: US 11
Gauge: 4.5 sts and 2.75 rows = 1 inches

ABBREVIATIONS:
C4B = Slip 1 to cable needle, K3 then K1 from cable needle
WYIB = With Yarn in Back, as if to knit
S1= Slip 1, as if to purl


Right Cross Video if needed
:http://www.youtube.com/watch?v=xxulTZA1cLA

**********
.
2 ways to purchase the pattern:
http://www.ravelry.com/patterns/library/slow-and-easy-cabled-arm-warmer
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal.
Also, you can click the "Buy Now" link below. Please do not distribute this pattern to the public.


Thanks for visiting!
Heather

Saturday, August 23, 2008

Soft cabled Arm Warmer #1



SOFT CABLED ARM WARMER

$3.00

This is a great knitted arm warmer to make. This was the first one I made. It's an elegant cable pattern.  You are only using the cable needle 2 times in every row repeat. It's definitely something a beginner can do easily.

The underside, as you can see above on the sides, is a slip stitch pattern that makes it very comfortable and durable. You can go in and out of it without stretching it out. It's like having comfortable elastic. Definitely cozy warm AND it won't move around on your while wearing it.




I wanted to give you some tips along with some information that you will see if you purchase the pattern. I don't want you to go in blind sort of speak. At least this way you have an idea of what the pattern may be.

TIPS
If you're new to knitting cables and you need some advice on the needle to use....I don't use the cable needles you see in stores. There are a couple of reasons. I've never found a straight one. What I use is a blue yarn needle that is sold in just about every store. If you were to use a straight metal yarn needle the stitches would fall right off. When I use the plastic kind I have no problems. They do sell the metal cable needles that look like wings and a hook. I can't hold them properly and they get caught on the yarn. Find what works best for you.


Another tip……When doing cables I only use circular needles. This way the when working with the cable needle I don’t have to worry about the left knitting needle falling down,  It's hard to keep everything in place with straight needed. When using circulars everything is connected. That's just my opinion if straight needles work for you by all means use them.

This pattern is made flat, not in the round. Sewing instructions included. I do have a diagram of a possible sewing technique. See below.



Further information....
CO: 29
Yards Used: approx. 70 yards
Finished Size: 6 inches wide by 8 inches high (but can easily make it longer or shorter)
Needle Size: 10.5 US
Yarn used: Utopia or any soft worsted weight yarn needed
Gauge: 4.75 stitches per inch

Rows: Do 1-26 then do rows 5-26 until you reach your desired length.

Cable Videos to help you out if needed.: 
Left Cross: http://www.youtube.com/watch?v=YZYKWm0JtEI
Right Cross:http://www.youtube.com/watch?v=xxulTZA1cLA

******************************************

To Purchase this Arm Warmer Pattern:
http://www.ravelry.com/patterns/library/soft-cabled-arm-warmer
You can purchase this pattern by going to the link above. It will take you to Ravelry.com. Don't worry you don't have to be a member to purchase it. It will go through Paypal. Please do not distribute this pattern to the public.



Thanks!
Heather

Simple Split Granite Arm Warmer



Vanna White Purple Speckled Yarn

This is a great knit arm warmer pattern for a beginner and it's a quick project. It only uses knits and purls to create it. You're repeating rows 1-12 but I wrote out the row numbers. You can make it as long as you would like.  You're basically making a 

I usually add 1/2 inch to the measurement of the wrist this is going to be on. I have a 6 inch wrist so I make mine 6 1/2 inches.

IF you're are is
Thumb hole? Yes, see sewing instructions
Yarn Used: Caron One Pound Worsted Weight, Blue or
Vanna White yarn, Purple Mist
CO: 23 or any odd number of stitches
Rows Completed: 54
Finished Size: 6 x 9 inches
Needle Size: 10.5
Made: Flat

Abbreviations:
WYIB = With yarn in back (as if to knit)
S1 = Slip 1 stitch as if to purl
* * = Repeat the instructions between * and  *

PATTERN:
Like I said at the beginning of my post that you are repeating rows 1-12. But I wrote them out in case you want to cross off the rows as you go along.

Rows 1,3,5,13,15,17,25,27,29,37,39,41,49,51,53:
P1,(WYIB , S1, P1) x 11

Rows 2-54 and all even rows: Purl all stitches

Rows 7,9,11,19,21,23,31,33,35,43,45,47:
P2,(WYIB , S1, P1) x 11 End last repeat with P2


FINISHING
  1. It’s important to do a loose bind off or it will squeeze your hand/arm. That's not to comfortable, trust me. I've made that mistake a couple of times.
  2. I always do a purl bind off no matter what stitch the last row is comprised of. It's so much more attractive then a knitted one. It's up to you.. Do what you want.
  1. When you end your last row cut your yarn and leave a tail. You will tie a knot to secure the sewing and then you can weave it in.





Sewing your arm warmer together

If you have your own method of sewing by all means do that. If you need instructions then I can tell you how to sew it together.

Place the arm warmer with the right side facing down. Then take the sides and fold them in ward. Pin the top of it as you're working.

  1. Now thread your yarn needle.
  1. Start sewing by threading your needle through the purl bump closest to the edge then put your needle through the purl bump closest to the edge on the opposite side. Pull the yarn through leaving about 4 inches and tie a loose knot (so it doesn't squeeze your wrist). Then tie another knot tightly to secure the first one.
  1. Now, whatever side your yarn needle is on, **go up a little and put your yarn needle through the purl bump closest to the edge and go straight across to the other side and do the same.** repeat the instructions between the asterisks. The diagram shows how to do it.
  2. Pull tight every couple of inches.

5. You can also pin where the thumb hole is going to be, if you want one. To do that lay it flat and slip your hand in it just like you would when wearing it. Use 2 safety pins where you want the beginning and end to be. When you get to the 1st safety pin weave the yarn into the sides until you get to the top pin and continue sewing again.

When you get to the very top do the last stitch and pull it tight (but not to tight) and tie a knot if you have a tail from when you finish your warmer.

If you ever have any questions please leave a comment on this post.

Thanks!!
Heather